Raadiosaatjate sagedused
- Viks
- Posts: 125
- Joined: 16 Oct 2009 01:04
- Location: Vääna
- Contact:
Raadiosaatjate sagedused
Kas keegi oskab öelda mis on raadiosaatjate kanalite sagedused, mis meie kasutame? Nimelt mul saatja kus pole siis eelnevalt salvestatud kanalid, vaid pean ise käsitsi neid kruttima. Kui teaks sagedusi saaks need endale mällu ära panna.
- Kris
- Echo6

- Posts: 655
- Joined: 15 Oct 2009 23:47
- Location: Tallinn
- Contact:
Re: Raadiosaatjate sagedused
Viks wrote:Kas keegi oskab öelda mis on raadiosaatjate kanalite sagedused, mis meie kasutame? Nimelt mul saatja kus pole siis eelnevalt salvestatud kanalid, vaid pean ise käsitsi neid kruttima. Kui teaks sagedusi saaks need endale mällu ära panna.
1 446.00625
2 446.01875
3 446.03125
4 446.04375
5 446.05625
6 446.06875
7 446.08125
8 446.09375
Who Dares, Wins
Does this ammo pouch make me look fat?
Does this ammo pouch make me look fat?
- Viks
- Posts: 125
- Joined: 16 Oct 2009 01:04
- Location: Vääna
- Contact:
Re: Raadiosaatjate sagedused
Tänud.
-
MarkoK
- Posts: 339
- Joined: 16 Oct 2009 16:00
- Contact:
Re: Raadiosaatjate sagedused
How to Memory RX & TX Frequency in Channel for UV-5R
1st Method: Channel without frequency.
e.g) RX: 150.000mhz TX: 160.000mhz
Step 1: Setting the Radio in Frequency mode first
Step 2: set the upper frequency to TX: 160.000mhz
Step 3: Press Menu 27
Step 4: Press Menu again to choose the Channel
Step 5: Press Menu to save the frequency in CH
Step 6: Press exit to go out the menu
Step 7: set the upper frequency to RX: 150.000mhz
Step 8: Press Menu 27
Step 9: Press Menu again to choose the same Channel
Step 10: Press Menu to save the frequency in CH
2nd Method: Overwrite the existing frequency in Channel
e.g) RX: 150.000mhz TX: 160.000mhz
Step 1: Setting the Radio in Frequency mode first
Step 2: set the upper frequency to RX: 150.000mhz
Step 3: Press Menu 28
Step 4: Press Menu again to choose the Channel that you want to delete
Step 5: Press Menu to confirm the delete of the frequency in channel
Step 6: set the upper frequency to RX: 150.000mhz
Step 7: Press Menu 27
Step 8: Press Menu again to choose the Channel
Step 9: Press Menu to save the frequency in CH
Step 10: set the upper frequency to TX: 160.000mhz
Step 11: set the upper frequency to RX: 150.000mhz
Step 12: Press Menu 27
Step 13: Press Menu again to choose the same Channel
Step 14: Press Menu to save the frequency in CH
1st Method: Channel without frequency.
e.g) RX: 150.000mhz TX: 160.000mhz
Step 1: Setting the Radio in Frequency mode first
Step 2: set the upper frequency to TX: 160.000mhz
Step 3: Press Menu 27
Step 4: Press Menu again to choose the Channel
Step 5: Press Menu to save the frequency in CH
Step 6: Press exit to go out the menu
Step 7: set the upper frequency to RX: 150.000mhz
Step 8: Press Menu 27
Step 9: Press Menu again to choose the same Channel
Step 10: Press Menu to save the frequency in CH
2nd Method: Overwrite the existing frequency in Channel
e.g) RX: 150.000mhz TX: 160.000mhz
Step 1: Setting the Radio in Frequency mode first
Step 2: set the upper frequency to RX: 150.000mhz
Step 3: Press Menu 28
Step 4: Press Menu again to choose the Channel that you want to delete
Step 5: Press Menu to confirm the delete of the frequency in channel
Step 6: set the upper frequency to RX: 150.000mhz
Step 7: Press Menu 27
Step 8: Press Menu again to choose the Channel
Step 9: Press Menu to save the frequency in CH
Step 10: set the upper frequency to TX: 160.000mhz
Step 11: set the upper frequency to RX: 150.000mhz
Step 12: Press Menu 27
Step 13: Press Menu again to choose the same Channel
Step 14: Press Menu to save the frequency in CH
-
MarkoK
- Posts: 339
- Joined: 16 Oct 2009 16:00
- Contact:
Re: Raadiosaatjate sagedused
võiks kasutusele võtta ka DCS seadistuse. Peaks kõrvaldama selle probleemi et mitu kanalit ronib sisse.
DCS koodide tabel ka, Cobra vasak tulp BF vasakult teine tulp.
http://www.n8lhg.com/gmrs3.htm
DCS koodide tabel ka, Cobra vasak tulp BF vasakult teine tulp.
http://www.n8lhg.com/gmrs3.htm
Who is online
Users browsing this forum: No registered users and 1 guest